Brutus Elite 35th Anniversary

BRUTUS ELITE 35

BE35-4000.1D
 

 

Brutus ELITE 35th Anniversary
Hifonics offers Super A/B Class™ full range and Super D-Class™ mono subwoofer amplifiers to continue the 35th Anniversary celebration of Hifonics. The Brutus ELITE or “BE35” offers several 2 and 4 channel full range with several mono amps along with a killer 5 channel that utilizes both Super A/B Class™ and Super D-Class™ in the same amplifier – the best part is the 5th channel is 1 ohm stable, which is unheard of in five channel high performance amplifiers. The big bruiser in the line is the Brutus BE35 2500.1D delivering 2500 watts at 1ohm.

Available exclusively from Hifonics ELITE Dealers.
 

 


BE35 4000.1D
NEW for 2017 is the new top of the line 4,000 watt BE35-4000.1D. That is 4K of Super D-Class POWER FROM THE GODS.
4K Super-D Class
 

 

Bass Control
In the signal path on the new 4K Brutus Elite the engineers have utilized the unique ParaQ™ circuit designed for the SUPER AMPS. This innovative circuitry allows full parametric control of the bass equalizer which can be controlled by the diagnostic bass remote.
Signal Control
 
The ParaQ™ Controls allow a center frequency adjustment of 30hz up to 100hz with a 0 to 10dB boost. The width of the frequency can also be adjusted from a very narrow range to very wide range. As an example you might focus on 32hz only – or a wide adjustment, using 40hz as the “center” frequency. This means that adjustments are made from 35 to 45hz. ParaQ™ delivers the most control of bass frequencies available from Hifonics.
 

 

Inside Amp
Inside Brutus Elite 35
Similar to the SUPER AMPS, the Brutus Elite 35th Anniversary edition use powerful and efficient transformers and audiophile grade capacitors and resistors. Electrical components are both through-hole and surface mount pieces that are all secured to double sided military grade glass resin epoxy circuit boards with beefed up copper traces. This ensures high voltaage can pass through the circuit with minimal distortion in the signal path.
 

 

MOFSET
Twin turbo power supply torroids in a Pulse Width Modulated MOSFET power supply design assure that car voltage is maximized from battery through to output MOSFET devices.
 

 

MOFSET Outputs
The BE35 Anniversary amplifiers also utilize Rock solid Ultra-Fi™ MOSFET outputs which are selected by the Hifonics engineers to be balanced for power output. This keeps power smooth even during demanding peak in the music.
 

 

BE35 also incorporates the following technology:
  • Ultra-Fi™ MOSFET - Produces high power with minimal distortion
  • Low Noise Pre Amplifier - Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • Tiffany Style RCA Connectors - Audiophile signal quality and maximum signal through-put with minimum distortion and maximum external noise rejection
  • Multi-Mode - 2 channel & bridged mono operation allows flexible installation for amplifiers to run in two-channel or bridged mono mode
  • Variable Electronic - Electronic crossovers allow for complete control of the sound
  • High Grade Aluminum - Heavy duty aluminum alloy heat-sink allows amplifier to quickly dissipate heat while producing maximum power
  • 4-Way System Protection Circuitry - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Illuminated Logo - The Hifonics logo illuminates when the amplifier is powered on
 

 

Bass Remote
Bass Remote
All Mono and five channel amplifiers include a bass remote to put the bass control at arm’s length. The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.
 

 

The engineers at Hifonics are proud to offer the next logical evolution in the famous Brutus line with this wide selection of full range, multi-channel and mono car audio amplifiers. The 35th Anniversary of Hifonics is the perfect time to get into the #PowerOfTheGods.

Available exclusively from Hifonics ELITE Dealers.
 

 

BE35 4000.1D Brutus Elite Amplifier

« Previous Next »
Brutus Elite 35th Anniversary 4000 watt subwoofer amplifier

More Views

Loading product images, please wait...

BE35 4000.1D Brutus Elite Amplifier

Be the first to review this product

Availability: From Elite Dealers Only

Part#: BE35 4000.1D

Details:

Hifonics 35th Anniversary 4000 watt Brutus Elite mono subwoofer car audio amplifier
$899.99

Hifonics Elite Authorized Dealers


Scroll down for product details

http://hifonics.com/be35-4000-1d/

Details

Description
Hifonics 35th Anniversary 4000 watt Brutus Super D-Class™ mono subwoofer amplifier with unique ParaQ™ electronic crossover circuit and diagnostic bass remote included.

Category: Brutus Elite 35th Anniversary
SKU: 806576227113
Part #: BE35 4000.1D

Features & Benefits
  • Pre-Amp Circuitry: Low Noise PreAmplifier
    Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion
  • Inputs 1: Tiffany Style RCA Connectors
    Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection
  • Inputs 2: Balanced Input
    Unused on this amplifier
  • Operation Mode: One Channel (Mono)
    Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
  • Crossover / Signal Shaping: Accu-Cross
    Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies
  • Equalizer: ParaQ Bass Contouring
    Parametric Bass EQ with adjustments:
    Boost (0-10dB)
    Width (Narrow-Wide (On Center)
    Center Frequency (30Hz - 100Hz)
  • Class / Topology: Super D-Class™
    Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.
  • Output Devices Technology: Ultra-Fi™ MOSFET
    The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
  • Heat Sink: Aluminum
    Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled
  • Power Supply: T3 Power Supply
    Hifonics T3 (Twin Turbo Toroids) power supply keeps voltage constant through the Ultra-Fi output devices
  • Strapping: Yes
    Power Strapping allows the installer to Sync the input signal and output power to double rated output of a mono amplifier to drive a single or group of subwoofers.
    Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level.
    CONSULT PROFESSIONAL INSTALLER.
  • Bass Remote: Diagnostic, Illuminated Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
    Three-stage protection circuits:
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
    Smooth potentiometer and ringed illumination in a satin black mount create a custom look
  • Speaker Output Connections: Nickel-Plated Brass
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Connections Type: Illuminated, Molded and Angled
    Secure connection for all Power, Ground and Speaker connections. Illuminated and angled for ease of access during installation.
  • Signal Pass Through: Yes
    One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables
  • Diagnostics: 4-Way System Protection Circuitry
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Illumination: Illuminated Logo
    The Hifonics logo illuminates when the amplifier is powered, making a #PowerFromTheGods statement in the dark


Specifications
  • Class
    Super D-Class™
  • Variable Voltage
    0.2V - 9V
  • Signal to Noise
    >95dB
  • Frequency Response
    10Hz-50KHz
  • Crossover Type
    Variable Electronic
  • High Pass Crossover: 12dB Per Octave
    N/A
  • Low Pass Crossover: 12dB Per Octave
    30Hz-250Hz
  • Crossover Frequency Range: CH1 & CH2
    N/A
  • Crossover Frequency Range: CH3 & CH4
    N/A
  • Crossover Frequency Range: CH 5
    N/A
  • Tone Control
    ParaQ Bass EQ
  • Bass Boost
    0~10dB: Variable Center Frequency and Width with ParaQ
  • Subsonic Filter
    15Hz-35Hz
  • Phase Shift
    0-180 Degrees
  • Power @ 1-Ohm
    1 x 4000
  • Power @ 2-Ohms
    1 x 2000
  • Power @ 4-Ohms
    1 x 1000
  • Mono Bridged @ 2-Ohms
    N/A
  • Mono Bridged @ 4-Ohms
    N/A
  • Total Channels
    1
  • Audio Inputs
    Yes
  • Audio Outputs
    Yes
  • Power Terminal: 12v/GND
    Oga
  • Speaker Terminal: Wire Gauge
    12g
  • Fusing
    External
  • Certifications
    N/A
  • Weight
    17lbs (7.7kg)
  • Dimensions ((L X W X H))
    22.8 x 8.75 x 2.5" (57.9 x 22.2 x 6.3cm)



Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Specials