Brutus

Brutus

For those that do not want to climb to the top of Mt. Olympus to choose a woofer, Hifonics offers the Brutus line of woofers. Built for stunning sound quality and Brutus strength because the gods demand it that way. You will see the line starts with 3” coils on the Mt. Olympus OLM1600D2 and in Brutus we move to a multi-layer 2.5” coil. Here we have cut away the skin of the Brutus woofer so you can gaze upon the gods and understand why the Brutus and other Hifonics woofers are second to none.

POWER FROM THE GODS
Hifonics Brutus Subwoofers

Brutus Subwoofers
Also available
The BRZ12SQD4 and BRZ15D4

Brutus Subwoofers
Vented aluminum former
Holds a 2.5” voice coil

Brutus Subwoofers
Butyl surround
Satin black linear Butyl rubber surround

  • 2XIL Ring - The 2XIL Ring is a heavy duty ABS trim ring with dual illumination. A great way to finish off your installation and the hint of illumination will draw just enough attention to your choice of the best woofer from atop Mt. Olympus.
  • Butyl Surround - Satin black linear Butyl rubber surround along with the REZTx spiders help keep the piston motion of the subwoofer linear and smooth.
  • Woven Pressed Polypropylene Cone - Heavy Duty woven texture polypropylene cone develops big bass while dramatically reducing cone flex which can rob the system of low deep bass.
  • H CAP - Injection molded two tone polypropylene dust cap adds strength to the woofer and proudly holds the Hifonics logo and H - mark of the Gods.
  • P & I Terminals - Nickel-plated 8 gauge P&I (push and insert) speaker terminals to secure MAXXLINK speaker wire connections easily.
  • Dual REZTx Spiders - Dual REZTx (Resin infused textile) spiders along with the Butyl surround, allow the Brutus woofer to handle more power without adding non-linear distortions.
  • D2S Steel Frame - Powder coated D2S Steel frame is a Deep Draw Stamped Steel design for incredible strength to handle deep powerful bass.
  • 30oz Motor - Vented high energy motor assembly with 30oz magnets increases power handling and increases SPL.
  • Voice Coil & Former Assembly - Vented aluminum former holds a 2.0” voice coil while allowing the heat to be exchange through the back pole piece, the Hercules Vent and through the spiders. Less heat means less distortion.
  • 56oz Motor - Double stacked high energy motor assembly with 56oz magnets increases power handling which increases SPL – sound pressure level.
  • Voice Coil & Former Assembly - Vented aluminum former holds a 2.5” voice coil while allowing the heat to be exchange through the back pole piece and through the dual REZTx spiders.

Brutus Power Bundle

« Previous Next »
Brutus Power Bundle

More Views

Loading product images, please wait...
  • Brutus Power Bundle

Brutus Power Bundle

Be the first to review this product

Part#: BRZ15D4-BRX4016.1D-Bundle

Details:

Hifonics 4000 Watt Brutus Super D-Class™ mono subwoofer amplifier bundled with a Brutus 15 inch Subwoofer for only $399!
$399.00

Price as configured: $399.00


Scroll down for product details

http://hifonics.com/brz15d4-brx4016-1d-bundle/

$399.00

Price as configured: $399.00

1 x BRX4016.1D   +$0.00
1 x BRZ15D4   +$0.00

* Required Fields

Price as configured: $399.00

Details

Description
Hifonics BRX4016.1D 4000 Watt Brutus Super D-Class™ mono subwoofer amplifier with unique ParaQ™ electronic crossover circuit and diagnostic bass remote bundled with a Brutus BRZ15D4 15 inch Dual 4 Ohm Subwoofer for only $399$

Category: Hifonics Products
SKU: HIF_BRUTUS_BUNDLE
Part #: BRZ15D4-BRX4016.1D-Bundle

Features & Benefits

BRX4016.1D

  • Pre-Amp Circuitry: Low Noise PreAmplifier
    Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • Inputs 1: Nickel-Plated RCA Connectors
    Audio quality RCA connectors to conduct best signal with minimal signal loss and maximum external noise rejection
  • Inputs 2: Balanced Input
    Unused on this amplifier
  • Operation Mode: One Channel (Mono)
    Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
  • Crossover / Signal Shaping: Accu-Cross
    Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies
  • Equalizer: ParaQ Bass Contouring
    Parametric Bass EQ with adjustments:
    Boost (0-10dB)
    Width (Narrow-Wide (On Center)
    Center Frequency (30Hz - 100Hz)
  • Class / Topology: Super D-Class™
    Hifonics has perfected the latest in digital chip technology to provide you with an extremely efficient, low temperature, high amplification system that others only dream about. There are several options for installation and the mono Super D-Class Brutus amplifiers can run at 1, 2 or 4-Ohm as well, for an even tighter bass response!
  • Output Devices Technology: Ultra-Fi MOSFETS Circuit
    Maximizing power efficiency while improving sound quality and minimizing distortion
  • Heat Sink: Aluminum
    Heavy duty aluminum alloy heat-sink & Lighted connectors and blue wash of light from the underside of the heat sink
  • Power Supply: T3 Power Supply
    Hifonics T3 (Twin Turbo Toroids) power supply keeps voltage constant through the Ultra-Fi output devices
  • Strapping: Yes
    Power Strapping allows the installer to Sync the input signal and output power to double rated output of a mono amplifier to drive a single or group of subwoofers.
    Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level.
    CONSULT PROFESSIONAL INSTALLER.
  • Bass Remote: Diagnostic, Illuminated Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
    Smooth potentiometer and ringed illumination in a satin black mount create a custom look
  • Speaker Output Connections: Nickel-Plated Brass
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Connections Type: Illuminated, Molded and Angled
    Secure connection for all Power, Ground and Speaker connections. Illuminated and angled for ease of access during installation.
  • Signal Pass Through: Yes
    One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables
  • Diagnostics: 4-Way System Protection Circuitry
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Illumination: Illuminated Logo
    The Hifonics logo illuminates when the amplifier is powered, making a #PowerFromTheGods statement in the dark

BRZ15D4

  • 15" Dual 4 Ohm Brutus Series Subwoofer
  • Polypropylene cone
  • Rubber surround
  • Dual flat nomex spider with woven tinsel leads
  • Nickel plated push and insert speaker terminals
  • Heat dispersing ported nickel plated back plate
  • Ultra ridged stamped steel basket
  • High strength ABS motor cover
  • Operates in sealed and ported enclosures
  • Black chrome plated gasket
  • 2.5" High-temperature voice coil
  • Double stacked magnet assembly


  • Specifications

    BRX4016.1D

    • Class
      Super D-Class™
    • Variable Voltage
      0.2V - 9V
    • Signal to Noise
      >95dB
    • Frequency Response
      10Hz-50KHz
    • Crossover Type
      Variable Electronic
    • High Pass Crossover: 12dB Per Octave
      N/A
    • Low Pass Crossover: 12dB Per Octave
      30Hz-250Hz
    • Crossover Frequency Range: CH1 & CH2
      N/A
    • Crossover Frequency Range: CH3 & CH4
      N/A
    • Crossover Frequency Range: CH 5
      N/A
    • Tone Control
      ParaQ Bass EQ
    • Bass Boost
      0~10dB: Variable Center Frequency and Width with ParaQ
    • Subsonic Filter
      15Hz-35Hz
    • Phase Shift
      0-180 Degrees
    • Power @ 1-Ohm
      1 x 4000
    • Power @ 2-Ohms
      1 x 2000
    • Power @ 4-Ohms
      1 x 1000
    • Mono Bridged @ 2-Ohms
      N/A
    • Mono Bridged @ 4-Ohms
      N/A
    • Total Channels
      1
    • Audio Inputs
      Yes
    • Audio Outputs
      Yes
    • Power Terminal: 12v/GND
      Oga
    • Speaker Terminal: Wire Gauge
      12g
    • Fusing
      External
    • Certifications
      N/A
    • Weight
      17lbs (7.7kg)
    • Dimensions ((L X W X H))
      22.8 x 8.75 x 2.5" (57.9 x 22.2 x 6.3cm)

    BRZ15D4

    • Power Handling RMS
      600 watts
    • Power Handling Peak
      1200 watts
    • Impedance
      2 x 4 Ohm
    • Sensitivity (1 watt / 1 meter)
      86dB
    • Cut-Out Ø
      13-7/8"
    • Top-mount depth
      7-1/4"



    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Maxxsonics Factory Specials
    Maxxsonics Factory Specials