Hifonics GA-5000.1D GOLIATH 5000 Watt Mono Sub Amplifier Car Audio Amp

GA-5000.1D Amplifier

« Previous Next »
Hifonics Goliath car audio amplifier

More Views

Be the first to review this product

Availability: Out of stock

Part#: GA-5000.1D


Hifonics GA-5000.1D GOLIATH 5000 Watt Mono 1-Ohm Stable Amplifier 1-Channel Subwoofer Car Audio Amp



Part #: GA-5000.1D | SKU: 806576228219 | Category: GOLIATH GA
Hifonics GOLIATH 5000 watt Super D-Class™ 1 ohm stable mono subwoofer amplifier designed with Ultra-Fi MOSFET output devices and 4 way system protecion cicutry. The GA-5000.1D is a strapple amplififer. Bass remote included.


Part #: GA-5000.1D | SKU: 806576228219 | Category: GOLIATH GA
  • Class
    Super D Class™
  • Variable Voltage
    9V - 0.2V
  • Signal to Noise
  • Frequency Response
  • Crossover
  • Variable Low Pass Crossover 12dB per Octave
    35Hz - 250Hz
  • Bass Boost
    0 - 10dB
  • Subsonic Filter
    15Hz - 35Hz
  • Phase Shift
  • Power @ 1 Ohm
    1 x 5000
  • Power @ 2 Ohms
    1 x 2500 Watts
  • Power @ 4 Ohms
    1 x 1250 Watts
  • Mono Bridged @ 4 Ohms
  • Total Channels
  • Audio Inputs
  • Audio Outputs
    1 RCA Output

    1 RCA Input

    Mode Switch
  • Power Terminal 12v/GND
    0 AWG
  • Speaker Terminal Wire Gauge
    10 AWG
  • Fusing
    External 275A
  • Total Harmonic Distortion (THD)

System Includes

Part #: GA-5000.1D | SKU: 806576228219 | Category: GOLIATH GA
More info in development & coming soon!

Features & Benefits

Part #: GA-5000.1D | SKU: 806576228219 | Category: GOLIATH GA
  • Low Noise Pre-Amplifier Circuitry
    Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • RCA Inputs
    Nickel-plated RCA jacks create the most effiecient audio connection and resist corrosion
  • Operation Mode
    Mono only
  • Crossover Type
    Internal crossovers networks allow for audiophile control of equalization circuits
  • Electronic Equalizer
    Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.

    Check specifications for specific frequencies for this amplifier
  • Class / Topology
    Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs
  • Output Device Technology
    The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
  • Heat Sink
    Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi™ output devices
  • Power Supply
    Simpatico Coil Design
    The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Output Connections
    High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal
  • Connection Type
    Molded and Angled

    Secure connection for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile
  • Full-Range RCA Outputs for Signal Pass Through
    Output RCA connectors are for use with STRAPPING feature
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
  • Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
  • Phase Adjustment
    Phase 0-180°

    Bass drum attack, snap requires phase between deep frequency subwoofers and upper midbass speakers

    Fat man/Skinny man, must arrive at your ear at the same time or bass sounds muddy
  • Strapping
    Power Strapping allows the installer to Sync the input signal and output power to double the rated output of a mono amplifier which will drive a single subwoofer or group of subwoofers.

    Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level (output voltage)



Part #: GA-5000.1D | SKU: 806576228219 | Category: GOLIATH GA
More info in development & coming soon!


Part #: GA-5000.1D | SKU: 806576228219 | Category: GOLIATH GA
Files & Manuals

Write Your Own Review

Only registered users can write reviews. Please, log in or register