BRUTUS Gamma BG

BG-3300.1D BRUTUS Gamma Amplifier

« Previous Next »
BG-3300.1D

More Views

  • BG-3300.1D
  • BG-3300.1D
  • BG-3300.1D

Be the first to review this product

Availability: Out of stock

Part#: BG-3300.1D

Details:

Hifonics 3300 Watts BRUTUS Gamma Mono Subwoofer Car Audio Amplifier.
$549.99

https://hifonics.com/bg-3300-1d/

Overview

Part #: BG-3300.1D | SKU: 806576231240 | Category: BRUTUS Gamma BG
Description
Hifonics BRUTUS Gamma Mono subwoofer audio amplifier delivers 3300 watts with Super D Class™ technology that features Ultra-Fi™ MOSFET outputs that are selected for both balance and output power.

Specifications

Part #: BG-3300.1D | SKU: 806576231240 | Category: BRUTUS Gamma BG
  • CEA Standards
    CTA-2006B Compliant. CTA stands for Consumer Technology Association and Hifonics has been a member for decades.
  • Class
    Super D Class™
  • Total Channels
    1
  • Power @ 1 Ohm (ch x watts)
    1 x 3300
  • Power @ 2 Ohms (ch x watts)
    1 x 1650
  • Power @ 4 Ohms (ch x watts)
    1 x 825
  • Crossover
    Variable Electronic 12dB Per Octave
  • Variable Low Pass Crossover 12dB per Octave
    30Hz-250Hz
  • Tone Control/Parametric EQ
    Built-in bass control
  • Bass Boost
    0-10dB
  • Subsonic Filter
    15Hz-35Hz
  • Phase Shift
    0-180 Degrees
  • Variable Voltage
    .2 to 9V
  • Frequency Response
    10Hz-500Hz
  • Total Harmonic Distortion (THD)
    < 0.10%
  • Speaker Level Audio Inputs
    Yes
  • Power Terminal 12v/GND
    2 AWG
  • Speaker Terminal Wire Gauge
    12 AWG
  • Fusing
    External

System Includes

Part #: BG-3300.1D | SKU: 806576231240 | Category: BRUTUS Gamma BG
More info in development & coming soon!

Features & Benefits

Part #: BG-3300.1D | SKU: 806576231240 | Category: BRUTUS Gamma BG
  • Low Noise Preamplifier Circuit
    Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • RCA Inputs
    Nickel-plated RCA jacks create the most effiecient High/Low Level audio connection and resist corrosion.
  • Operation Mode
    Mono only.
  • Crossover Type
    Variable electronic crossovers allow for complete control of the sound.
  • Electronic Equalizer
    Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.
  • Class/Topology
    Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.
  • Output Device Technology
    Pro-Fi™ Output Device Technology: The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion.
  • Heat Sink
    Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi™ output devices.
  • Power Supply
    Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices.
  • Output Connections
    High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal.
  • Connection Type
    Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile.
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
  • Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
  • Phase Adjustment
    Phase 0-180°: Bass drum attack, snap requires phase between deep frequency subwoofers and upper midbass speakers.
  • Strapping
    Power Strapping allows the installer to Sync the input signal and output power to double the rated output of a mono amplifier which will drive a single subwoofer or group of subwoofers. Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level (output voltage). CONSULT PROFESSIONAL INSTALLER.

Technology

Part #: BG-3300.1D | SKU: 806576231240 | Category: BRUTUS Gamma BG
More info in development & coming soon!

Support

Part #: BG-3300.1D | SKU: 806576231240 | Category: BRUTUS Gamma BG
Files & Manuals
Please check out TEQ Support.


Write Your Own Review

Only registered users can write reviews. Please, log in or register