For those that do not want to climb to the top of Mt. Olympus to choose a woofer, Hifonics offers the Brutus line of woofers. Built for stunning sound quality and Brutus strength because the gods demand it that way. You will see the line starts with 3” coils on the Mt. Olympus OLM1600D2 and in Brutus we move to a multi-layer 2.5” coil. Here we have cut away the skin of the Brutus woofer so you can gaze upon the gods and understand why the Brutus and other Hifonics woofers are second to none.

Hifonics Brutus Subwoofers

Brutus Subwoofers
Also available
The BRZ12SQD4 and BRZ15D4

Brutus Subwoofers
Vented aluminum former
Holds a 2.5” voice coil

Brutus Subwoofers
Butyl surround
Satin black linear Butyl rubber surround

  • 2XIL Ring - The 2XIL Ring is a heavy duty ABS trim ring with dual illumination. A great way to finish off your installation and the hint of illumination will draw just enough attention to your choice of the best woofer from atop Mt. Olympus.
  • Butyl Surround - Satin black linear Butyl rubber surround along with the REZTx spiders help keep the piston motion of the subwoofer linear and smooth.
  • Woven Pressed Polypropylene Cone - Heavy Duty woven texture polypropylene cone develops big bass while dramatically reducing cone flex which can rob the system of low deep bass.
  • H CAP - Injection molded two tone polypropylene dust cap adds strength to the woofer and proudly holds the Hifonics logo and H - mark of the Gods.
  • P & I Terminals - Nickel-plated 8 gauge P&I (push and insert) speaker terminals to secure MAXXLINK speaker wire connections easily.
  • Dual REZTx Spiders - Dual REZTx (Resin infused textile) spiders along with the Butyl surround, allow the Brutus woofer to handle more power without adding non-linear distortions.
  • D2S Steel Frame - Powder coated D2S Steel frame is a Deep Draw Stamped Steel design for incredible strength to handle deep powerful bass.
  • 30oz Motor - Vented high energy motor assembly with 30oz magnets increases power handling and increases SPL.
  • Voice Coil & Former Assembly - Vented aluminum former holds a 2.0” voice coil while allowing the heat to be exchange through the back pole piece, the Hercules Vent and through the spiders. Less heat means less distortion.
  • 56oz Motor - Double stacked high energy motor assembly with 56oz magnets increases power handling which increases SPL – sound pressure level.
  • Voice Coil & Former Assembly - Vented aluminum former holds a 2.5” voice coil while allowing the heat to be exchange through the back pole piece and through the dual REZTx spiders.

Zeus Brutus Bundle

« Previous Next »
Hifonics Zeus Brutus Bundle

More Views

Loading product images, please wait...

Zeus Brutus Bundle

Be the first to review this product

Part#: ZXX-3200.1D_BRZ12SQD4_Bundle


Hifonics bundle includes a Zeus 3200W, 1 Ohm Stable Mono Channel Car Audio Amplifier plus a Brutus 600W, 12 inch dual 4 ohm square subwoofer for $299!

As low as: $299.00

Price as configured: $299.00

Scroll down for product details

As low as: $299.00

Price as configured: $299.00

1 x ZXX-3200.1D   +$0.00
1 x BRZ12SQD4   +$0.00

* Required Fields

Price as configured: $299.00


The ZXX-3200.1D is a classic Hifonics aluminum heatsink with a Zeus 3200 watt, 1 ohm stable, Class D mono subwoofer car audio amplifier featuring onboard electronic crossover, boost EQ and includes a bass remote. The BRZ-12SQD4 is a Hifonics Brutus series 12 inch square subwoofer with 600 watts RMS and 2 x 4 ohms impedance that operates in sealed and ported enclosures and features a 2.5 inch high-temperature voice coil and double stacked magnet assembly.

Category: Hifonics Products
SKU: ZXX-3200.1D_BRZ12SQD4_Bundle
Part #: ZXX-3200.1D_BRZ12SQD4_Bundle

Features & Benefits
ZXX-3200..1D Amplifier
  • Pre-Amp Circuitry: Low Noise PreAmplifier
    Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • Inputs: Nickel Plated
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Hi Level Inputs: Low Level RCA Inputs and Outputs
    Highest sound quality connection
  • Operation Mode: Mono mode
    Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
  • Class / Topology: Class D
    High efficiency with big power in a small footprint
  • Output Devices Technology: PWM MOSFET Power Supply
    Stable power through the PC board with minimal heat generation
  • Heat Sink: Aluminum
    Old School Hifonics Heat sink for Superior Heat Dissipation
  • Power Supply: Simpatico Coil Design
    The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Bass Remote: Included
    Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
  • Output Connections: RCA Outputs
    Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
  • Connections Type : Molded / Angled
    Secure connection for all system wires. Angled for ease of access for installation
  • Diagnostics: Diagnostic Indicators DC, Short Circuit, Thermal and Overload Protection
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Illumination: Illuminated Logo
    The Hifonics logo illuminates when the amplifier is powered, making a #PowerFromTheGods statement in the dark

BRZ12SQD4 Subwoofer
  • 12" Dual 4 Ohm Brutus Series Square Subwoofer
  • Polypropylene cone
  • Rubber surround
  • Dual flat nomex spider with woven tinsel leads
  • Nickel plated push and insert speaker terminals
  • Heat dispersing ported nickel plated back plate
  • Ultra ridged stamped steel basket
  • High strength ABS motor cover
  • Operates in sealed and ported enclosures
  • Black chrome plated gasket
  • 2.5" High-temperature voice coil
  • Double stacked magnet assembly

ZXX-3200..1D Amplifier
  • Class
    Class D
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise Ratio
  • Frequency Response
  • Crossover Type
    Variable Electronic
  • Low Pass Crossover
    12dB Per Octave

  • Bass Boost
  • Subsonic Filter
  • Power @ 1-Ohm
  • Power @ 2-Ohms
  • Power @ 4-Ohms
  • Total Channels
  • Audio Inputs
    RCA Jack
  • Audio Outputs
    RCA Jack
  • Power Terminal 12v/GND
    2 gauge
  • Speaker Terminal Wire Gauge
    10 gauge
  • Fusing
    External ANL (250A Recommended)
  • Dimensions
    20.0 x 2.4 x 10 in
    50.8 x 6 x 25.4cm
  • Weight
    13.3 lbs (6.03 kg)

BRZ12SQD4 Subwoofer
  • Power Handling RMS
    600 watts
  • Power Handling Peak
    1200 watts
  • Impedance
    2 x 4 Ohm
  • Sensitivity (1 watt / 1 meter)
  • Cut-Out Ø
  • Top-mount depth

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Specials
Maxxsonics Factory Specials