https://hifonics.com/tps-a600-5/
Overview
Description
Hifonics THOR compact Five Channel, 600 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors. Bass remote included.
Specifications
- Class
Full Range Class D - Variable Voltage
0.2V~9V - Signal to Noise Ratio
>90dB - Frequency Response
20Hz-20kHz - Crossover Type
N/A - Crossover Frequency Range
CH1 & CH2
Switched HP/ Full - Crossover Frequency Range
CH3 & CH4
Switched HP/ Full - Crossover Frequency Range
CH5
LPF 50Hz-150Hz - Bass Boost
0-12dB@45Hz - Subsonic Filter
60Hz - Power @ 2-Ohms
4 x 80W + 1 x 200W - Power @ 4-Ohms
4 x 40W + 1 x 100W - Total Channels
5 - Audio Inputs
RCA - Power Terminal 12v/GND
Molex 10 ga - Speaker Terminal Wire Gauge
Molex Plug Connector - Fusing
1 x 40 Amps - Certifications
Marine & Powersports - Dimensions
3.70 X 8.46 X 1.77 in
9.4 X 21.5 X 4.5 cm - Weight
3.35 lbs (1.52 kg)
System Includes
More info in development & coming soon!
Features & Benefits
- Marine Grade Protection: YES Amplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage Special preamplifier reduces incoming noise from source units dramatically improving sound quality
- Inputs: 2 Pair, RCA (Front/Rear) 1 Pair, RCA (Subwoofer) Nickel-Plated High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode: Four channel and with dedicated subwoofer channel Unique design allows this amplifier to power full range speakers with a dedicated channel for a subwoofer.
- Crossover / Signal Shaping: Switched FULL / LPF / HPF Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Bass Remote Inluded: YES Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
- Output Connections: Quick Dissconect Wires, RCA Connections Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Nickel plated corrosion resistant connections
- Diagnostics: Three-stage protection circuits Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: YES Water resistant for durability in any environment
Technology
More info in development & coming soon!