Hifonics THOR compact Five Channel, 600 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors. Bass remote included.
| Weight | 4.5 lbs |
|---|---|
| Dimensions | 14.0 × 7.0 × 3.26 in |
| Item Length (in) | 3.7 |
| Item Width (in) | 8.46 |
| Item Height (in) | 1.77 |
| Type | Amplifier |
| Brand | Hifonics |
| Series | THOR |
| Category | Marine, Powersports |
| Condition | New |
| Color | Black |
| Warranty | 1 Year |
| Compatible Vehicles | Universal |
| Amp Class | Full Range Class D |
| Amp Total Channels | 5 |
| Amp Max Power (watts) | 600 |
| Amp Power @ 2 Ohms (ch x watts) | 4 x 80 + 1 x 200 |
| Amp Power @ 4 Ohms (ch x watts) | 4 x 40 + 1 x 100 |
| Amp Crossover | Switched HP/Full |
| Amp Variable Low Pass Crossover 12dB per Octave | 50Hz-150Hz |
| Amp Bass Boost | 0-12dB @ 45Hz |
| Amp Subsonic Filter | 60Hz |
| Amp Variable Voltage | 0.2-9V |
| Amp Signal to Noise | > 90dB |
| Amp Frequency Response | 20Hz-20kHz |
| Amp Speaker Level Audio Inputs | RCA |
| Amp Power Terminal 12v/GND | Molex 10 GA |
| Amp Speaker Terminal Wire Gauge | Molex Plug Connector |
| Amp Fusing | 1 x 40A |
| Proposition 65 Notice | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Marine Grade Protection / IPX Rating | Amplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture. |
|---|---|
| Low Noise Preamplifier Circuit | Low Noise Pre-Amplifier Stage: Special preamplifier reduces incoming noise from source units dramatically improving sound quality. |
| RCA Inputs | 2 Pair, RCA (Front/Rear) - 1 Pair, RCA (Subwoofer) Nickel-Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant. |
| Operation Mode | Four channel and with dedicated subwoofer channel: Unique design allows this amplifier to power full range speakers with a dedicated channel for a subwoofer. |
| Crossover Type | Switched FULL/LPF/HPF: Complete control of amplifier signal, essential when using two or more amplifiers. |
| Class / Topology | Full Range Class D: Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink. |
| Output Device Technology | PWM MOSFET Power Supply: Stable power through the PC board with minimal heat generation. |
| Heat Sink | Aluminum: Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration. |
| Power Supply | Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. |
| Output Connections | Quick Dissconect Wires, RCA Connections: Quickly remove amplifer when you are putting machine up for the winter of as a security precaution. |
| Connection Type | Nickel plated corrosion resistant connections. |
| LED System Protection Circuitry Diagnostics | Three-stage protection circuits: Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel. |
| Bass Remote Included | Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle. |
| Additional Features | Marinized/Waterproof: Water resistant for durability in any environment. |
View/Download  (731.9 KB) | Hifonics THOR Amplifiers (TPS-A) Quick Start Guide (Rev2) |
|---|
Related products
-
TPS-A500.2 THOR 500 Watt Amplifier
$ 179.99 -
TPS-A350.4 THOR 350 Watt Amplifier
$ 179.99 -
TPS-A500.1 THOR 500 Watt Amplifier
$ 179.99