Hifonics 35th Anniversary 2100 watt Super D-Class™ BRUTUS ELITE mono subwoofer amplifier with electronic crossovers, bass equalization and bass remote included.
BRUTUS ELITE 35th Anniversary
|Elite Dealer Only||
|Amp Total Channels||
|Amp Max Power (watts)||
|Amp Power @ 1 Ohm (ch x watts)||
1 x 2100
|Amp Power @ 2 Ohms (ch x watts)||
1 x 1400
|Amp Power @ 4 Ohms (ch x watts)||
1 x 700
|Amp Variable High Pass Crossover 12dB per Octave||
|Amp Variable Low Pass Crossover 12dB per Octave||
|Amp Tone Control / Parametric EQ||
|Amp Bass Boost||
0-9dB @ 45Hz
|Amp Subsonic Filter||
|Amp Variable Voltage||
|Amp Signal to Noise||
|Amp Frequency Response||
|Amp Speaker Level Audio Inputs||
|Amp Power Terminal 12v/GND||
|Amp Speaker Terminal Wire Gauge||
|Proposition 65 Notice||WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov|
|Low Noise Preamplifier Circuit|
Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion.
Tiffany Style RCA Connectors: Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection.
One Channel (Mono): Mono mode is intended for subwoofers only.
Accu-Cross: Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies.
Electronic: Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
|Class / Topology|
Super D-Class™: The proprietary "Super D-Class” design uses high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels. Hifonics Super D-Class results in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.
|Output Device Technology|
Ultra-Fi™ MOSFET: The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion.
Aluminum: Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled.
Twin Turbo: The Twin Turbo Coil PS is a Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices.
Nickel-Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
Illuminated, Molded and Angled: Secure connection for all Power, Ground and Speaker connections. Angled for ease of access during installation.
|Full-Range RCA Outputs for Signal Pass Through|
One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables.
|LED System Protection Circuitry Diagnostics|
4-Way System Protection Circuitry: Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel.
|Bass Remote Included|
Illuminated Bass Remote Included: Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle. Smooth potentiometer and ringed illumination in a satin black mount create a custom look.
Power Strapping allows the installer to Sync the input signal and output power to double rated output of a mono amplifier to drive a single or group of subwoofers. Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level. CONSULT PROFESSIONAL INSTALLER.
ILLUMINATION: Hifonics logo the molded and angled output connectors.