Kawasaki Audio waterproof system for the MULE PRO-MX™, including an AM/FM Bluetooth Radio Powered Source Unit. Four channel 160 watt internal amplifier source unit powers 2 high end speakers mounted in composite enclosures.
Kawasaki MULE PRO-MX
|All-in-One Amplifier Power (watts)||
|All-in-One Frequency Response||
Source Unit: 85Hz-20kHz, Speakers: 55Hz-28kHz
|All-in-One Unit Dimensions (in)||
Mounting Bezel: 3.12 x 2.87 x 7.48, Mounting Depth: 1.16, Mounting Hole: 1.23
|All-in-One Bluetooth Range (ft)||
|All-in-One Pre-amp Input||
1 Pair, AUX-RCA
|All-in-One Pre-amp Output||
2 Pair, Front: RCA, Rear: RCA
|Additional Details||[Source Unit] TUNER SECTION FM STEREO FREQUENCY RANGE: 87.5MHz-108MHz, TUNER SECTION S/N RATIO: >55dB, RMS POWER OUTPUT: 4 x 20 Watts, PEAK POWER OUTPUT: 4 x 40 Watts, S/N @1W: 81.2dBA, PRE-AMP VOLTAGE: 2.0V, DISPLAY TYPE: LCD, DISPLAY BACKLIT: Yes, LCD FONT SIZE: Medium, MINIMUM SPEAKER IMPEDANCE: 4 Ohms, [Speakers] RMS POWER HANDLING (CEA426B): 50 Watts, PEAK POWER HANDLING (CEA426B): 100 Watts, SPEAKER IMPEDANCE: 4 Ohm, CROSSOVER SLOPE: 12dB Per Octave|
|Proposition 65 Notice||WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov|
|Compatible Vehicle Fitment|
Fits Kawasaki MULE PRO-MX.
|Marine Grade Protection / IPX Rating|
IPX67 Rated. Tested to the highest Marine and Motorsports standards for resisting the elements. Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand. UVA Certified, CEA426B.
Kawasaki has designed an audio system that will integrate seamlessly in to your machine. The new system is includes all the key components needed for an all inclusive system. This Kawasaki Audio system is engineered to deliver great sounding music, season after season after season and install perfectly in your ride.
|Integrated Source Unit|
SOURCE TYPE: AM/FM/Bluetooth Enabled Gauge Mount Radio. ACCESS TYPE: Allows all access to radio stations and content from Bluetooth enabled devices.
BUILT-IN POWER: Four channels with 45 watts of output. These channels remain active when running external amplifiers (RCA Output) to run additional speakers in the cabin.
|Integrated Full-Range Drivers|
CONFIGURATION: 2-Way Full Range.
|Integrated Mid-Range Drivers|
5.25 INCH COMPOSITE POLY MIDRANGE: The composite poly cone provides sharp deep bass while remaining waterproof.
|Integrated Tweeter Drivers|
.75 INCH PURE TITANIUM DOME TWEETER: Very smooth musical response, high output with minimal required amplifier power.
|Enclosure / Structure|
NATURAL BUTYL RUBBER: Remains musical in all weather. Does not stiffen in cold. COMPOSITE ABS AND GLASS FIBER FRAME: Composites add strength to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker. COMPOSITE GRILLS: UV treated against sun fade and waterproof. COMPOSITE ADAPTORS (2), TOP OF DASH: High temperature composite adaptors secure the speakers to the machine and aide in assuring deep bass. Fully waterproof.
Bluetooth, RCA, USB. Nearly nothing the device can not play. Cassettes and 8-tracks not withstanding.
Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process.
Large Waterproof. Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off are all protected from the elements with the large waterproof button. Their size and space also makes them easy to operate with riding gloves on.
DASH PANEL: High temperature composite dash mount secure the source unit and will accommodates two rocker mount switches.
SYSTEM HARNESS: Plug and Play Harness. Waterproof Connectors with premeasured wires. No guess work, no installation mistakes. TINSEL LEADS SILICONE JACKET: Silicone jacketed, extra flexible leads for strength and durability. WATERPROOF CONNECTORS: Kawasaki specific connector to secure electrical connections and remain waterproof.
|Time and Tools|
Standard Hand Tools. Installation is 1 hour or less.
CROSSOVER TYPE: 12DB BUTTERWORTH INTERNAL: Smooth transition from high to lower frequencies remain musical and not harsh or distorted. COIL AND COIL FORMER: High Temperature Copper Coil mounted on a Kapton former offer superior heat dissipation to avoid distortion in the critical mid range/mid bass frequencies. MIDRANGE SPIDER DESIGN: Water resistant spider with woven fibers to stabilize the cone and voice coil in all musical situations. FRONT AND REAR VENTING: Air passes through the spider and back plate to exchange air over the voice coil. HIGH ENERGY Y36 MOTOR ASSEMBLY: High energy strontium ferrite magnet for higher output with minimal amplifier power.
|View/Download (308.8 KB)|
Hifonics Kawasaki Source Unit (GMR-3K) Quick Start Guide (Rev4)
|View/Download (1.6 MB)|
Hifonics Kawasaki MULE PRO-MX Audio System (99994-1186) Installation Manual (Rev5)
|Additional Info & Notes|