TPS-CXSP65 Compression Horn Speaker

« Previous Next »
6.5 Inch Compression Horn

More Views

Be the first to review this product

Part#: TPS-CXSP65


6.5 inch Wake Tower Compression Horn Speaker in a reinforced compact enclosure. Includeds mounting hardware. Pair (black)


Part #: TPS-CXSP65 | SKU: 806576227151 | Category: Compression Horns
Hifonics marine and powersports certified high end 6.5 inch Wake Tower Coincident Mounted Compression Horns in a compact enclosure featuring UHS (ultra-high sensitivity) Technology and Wavelength Transparent Acoustic Lenses with a polypropylene cone. Packaged as pairs (Black). Illuminated


Part #: TPS-CXSP65 | SKU: 806576227151 | Category: Compression Horns
  • RMS Power Handling (CEA426B)
  • Peak Power Handling (CEA426B)
  • Speaker Impedance
    4 Ω
  • Frequency Response +/- 10dB
  • Frequency Response +/- 3dB
    45Hz - 22kHz
  • Sensitivity (1 watt/1 meter)
  • Tower Length
    8" (203.2mm)
  • Hang Height
    7" (177.8mm)
  • Height
    6.75" (171.4mm)
  • Width
  • Certifications
    IPX6/7, Conformal Coated, UVA Certified, CEA426B
  • Dimensions
    12 X 10.25 X 15.69 in (30 x 26 x 39.6 cm)
  • Weight
    7.5 lbs (3.4 kg)

System Includes

Part #: TPS-CXSP65 | SKU: 806576227151 | Category: Compression Horns
More info in development & coming soon!

Features & Benefits

Part #: TPS-CXSP65 | SKU: 806576227151 | Category: Compression Horns
  • Marine Grade Protection: Marine/Powersports Certified
    LIFE SHIELD protectent for water and dust. UV protected against sun fade. Meets or exceeds IPX6/7 standards
  • Tweeter Dome Material: .75" Pure Titanium Compression Diaphram
    Very smooth musical response, with very high output with minimal required amplifier power
  • Surround: Natural Butyl Rubber
    Remains musical in all weather. Does not stiffen in cold.
  • Cone:6.5 inch Composite Poly Cone
    Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
  • Voice Coil Former: High Temperature Voice Coil and Former
    Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
  • Spider: Water resistant spider
    Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
  • Cooling System: Front and Rear Venting
    Air passes through the spider and back plate to exchange air over the voice coil.
  • Crossover Type: 12dB Butterworth
    Smooth transition from high to lower frequencies remain musicial and not harsh or distorted
  • Frame:Composite ABS and glass fiber frame
    Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker
  • Motor: High Energy Y30 Motor assembly
    High energy strontium ferrite magnet for higher output with minimal amplifier power
  • Grills: Composite
    UV treated against sun fade and waterproof
  • Marine Certified: YES
    Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.
  • IPX67: YES
    Tested to the highest Marine and Motorsports standards for resisting the elements
  • Tweeter Material: Titanium Dome Tweeter
    Very smooth musical response, high output with minimal required amplifier power
  • Marine Certified Crossover: Marine Certified Crossover
    Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
  • Illumination: YES
    Hardwired illumination for traditional Hifonics Blue, Red or "off".
  • Enclosure: Injection Molded Enclosure
    Heavy duty ABS cast enclosure provides strength and improved bass response with increased volume while remaining very light weights
  • Mounting System: Steel Reinforced
    The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength
  • Centering Ring: YES
    Centering ring allows the speakers to tip left/right when mounted to an arced mount
  • Mounting Hardware: Powder coated Die Cast Mounts
    Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust
  • Mounting Hardware Options: Flexible Mounting
    Eleven mounting hardware options from 1.5" to 2.75” included


Part #: TPS-CXSP65 | SKU: 806576227151 | Category: Compression Horns
More info in development & coming soon!


Part #: TPS-CXSP65 | SKU: 806576227151 | Category: Compression Horns
Files & Manuals

Write Your Own Review

Only registered users can write reviews. Please, log in or register